$0.00Rig #23 Rated: 16,000 – DRAWWORKS : Skytop Brewster N-95, TRAVELING BLOCK & HOOK : Ideco Shorty 300 Ton, ROTARY TABLE : Skytop Brewster 27′, COMPOUND : National 3 Engine – B.O.P EQUIPMENT – CLOSING UNIT : 6 Station 150 Gallon – MUD SYSTEM – MUD PUMP #1 : Brewster B-1600T, MUD PUMP #2 : Brewster B-1600T, MUD TANKS : (2) Mud Tanks – 1000 BBL, SHALE SHAKER – Swaco Linear Shaker, DESILTER : Swaco 12 Cone, DESANDER : Swaco 2 Cone – POWER PACKAGE & LIGHTING – ENGINES : (3) Cat 3508 800 HP w/National Torques, LIGHT PLANT #1 : Detroit Series 60 350 kW, LIGHT PLANT #2: Cat D-353 300 kW – MAST & SUBSTRUCTURE – MAST : DSI 136′ 750,000# GNC, SUBSTRUCTURE : Ideco 19′ – STORAGE CAPACITIES – WATER TANKS : (2) 400 BBL
$0.00RIG #20 Rated: 16,000 – DRAWWORKS : National 110M w/V-200 Hydromatic, SWIVEL – National 815 350 Ton, TRAVELING BLOCK & HOOK – Ideal 480T, ROTARY TABLE : Ideco 27″, COMPOUND : National 3 Engine Sectional w/Dual Pump – B.O.P EQUIPMENT – CLOSING UNIT : 8 Station 200 Gallon – MUD SYSTEM – MUD PUMP #1 : Skytop Brewster B-1600T, MUD PUMP #2 : Skytop Brewster B-1600T, MUD TANKS : (2) Mud Tanks – 1000 BBL, SHALE SHAKER : Swaco Dual Linear Shaker, DESILTER : Swaco 12 Cone, DESANDER : Swaco 1 Cone – POWER PACKAGE & LIGHTING – ENGINES : (3) Cat D-398 w/National Torques , LIGHT PLANT #1 : CAT C-15, 480V, LIGHT PLANT #2 : CAT C-15, 480V – MAST & SUBSTRUCTURE – MAST : Skytop Brewster 142′ 1,300,000# GNC, SUBSTRUCTURE : 20′ Step Up, PUSHER HOUSE : Teton 10′ x 40′ Skidmount, STORAGE CAPACITIES: WATER TANKS -800 BBL
$0.00Atlas Copco Xrvs1350 Portable Air Compressor, Rated 1335 Cfm @ 365 Psi, Cat C18 Diesel Tier Iii Engine, Aftercooler With Water Separator, Filtration, Tandem Axle Trailer, Pintle Hitch, Electric Brakes, Drill Air Package
- $0.00
Atlas Copco Xrvs1350 Portable Air Compressor, Rated 1335 Cfm @ 365 Psi, Cat C18 Diesel Tier Iii Engine, Aftercooler With Water Separator, Filtration, Tandem Axle Trailer, Pintle Hitch, Electric Brakes, Drill Air Package
$0.00We can provide a variety of products including non magnetic raw materials, NM drill collars and tools, Flex Joints, Stabilizers, Roller Reamers, Hole Openers, Circulating subs, Lift Subs, X-Overs and is certified to API Spec 7-1, API Q1 and ISO 9001:2008 to ensure you receive the highest level of quality.
$0.00TCI/RC uses precision-engineered roller cones can be run in rotary and rotary steerable assemblies in both straight and deviated holes, range of milled tooth and tungsten carbide insert (TCI) cutting structures are available for a variety of formation conditions. , with on site demountable cutters that are easily replaced
$0.00PDC hole opener
6 1/4 to 42 in.
for hole enlarging in both soft and medium formations
machined from single block of AISI 4145H alloy steel
Jets with replaceable nozzles continuously clean
Customs can choose grade of PDC cutters for different formations.
range of PDC cutting structures are also available
$0.00Bi-Directional Reamer PDC
Sizes 5-16″
Connection: API PIN & box
Protruding TCI Buttons on blade faces
PDC cutters on leading edges of blades
$0.00Bit sizes : From 5 7/8inch to 36inch
Tooth type: (ST)Steel Tooth or TC
Connection: API REG PIN
Nozzle: Three jet(side) nozzles,
Bearing TYPE : sealed journal
$0.00Test Stump, 11″ 5,000psi per Drawing TST-115MX3.5IF, 2 – 1/2″ NPT Test Ports, 3 1/2″ IF removable Box Connection on 48″ square x 2″ thick base plate, 11″ 5M Flange API 16A Monogrammed
$0.00Test Stump 7 1/16″ 5,000psi S/S Lined Ring Grooves with 1/2″ NPT Test Ports and Drain ports, 1/2″ NPT Ball Valve installed with S/S Plug, Heat Treated, Fork Lift Slots
We have a large inventory of pressure control equipment in stock and or we can custom build or repair onsite at our licensed API facility
$0.00X-Rig Manifold, 4 1/16″ x 3 1/16″ 10,000psi PSL-3, PR-1, EE-1.5 Trim, Single Hydraulic Choke Design, w/ New Manufactured Second Hydraulic Choke Modification per drawing X11-1088-MOD Revision 1 installed on Manifold
$0.00SHEAR BONNETS/BOOSTERS
2 Sets 11″ 5M/10M
1 Set 13-5/8″ 5M
2 Sets 13-5/8″ 10M
1 Set 16-3/4″ 5M
1 Set 21-1/4″ 2M-3M
1 Set 21-1/4″ 10M
$0.00Studded Tee, 4 1/16” 10,000psi x 4 1/16” 10,000psi x 4 1/16” 10,000psi, PSL-3, EE-NL Trim, Temp. Class U, Alloy Ring Grooves, Studded End Gate Valve, 4 1/16″ 10,000psi, Total, Model TFC, Manually Operated, PSL3, PR2, EE-1.5 Trim, Temp. Class U, Flanged End 2 – Double Studded Adapters, 4 1/16″ 10,000psi x 3 1/16″ 10,000psi x 3″ OAL, Alloy Ring Grooves, PSL3, EE-NL Trim, Temp Class U, Studded End, c/w B7 Black Tap-End Studs with Grade 2H Nuts installed Adapter Spool, 4 1/16″ 10,000psi x 3 1/16″ 10,000psi x 18″ OAL, Alloy Ring Grooves, PSL3, EE-NL Trim, Temp Class U, Flanged End
