$0.0013-5/8″ 10M Cameron Type U Single BOP. Large Bore Shear Bonnets with Tandem Boosters.Remanufactured by API 16A Facility. Complete with Databook. Ready to Ship, Will be retested prior to shipment.
$0.0011” 5k Schaffer Spherical type annular.
Unused and will have new 16a 5 yr. certification
$0.0011″ 5,000 CAMERON TYPE U SINGLE RAM BOP
MAY BE SOLD AS-IS OR REMANUFACTURED WITH API 16A CERTIFICATION
$0.0011″ 5,000 CAMERON TYPE U DOUBLE RAM BOP WITH LARGE BORE SHEAR BONNETS WITH TANDEM BOOSTERS
BOP SHOWN IS FLANGED TOP AND BOTTOM WITH (4) EACH 3 ” 5,000 FLANGED SIDE OUTLETS (IN REMANUFACTURED CONDITION)
MAY BE SOLD AS-IS OR REMANUFACTURED WITH API 16A CERTIFICATION
$0.0011″ 15,000 TYPE U SINGLE BOP
BOP SHOWN IS STUDDED TOP, 15,000# FLANGED BOTTOM WITH (2) EACH 4 ” 15,000 STUDDED SIDE OUTLETS (IN AS-IS CONDITION)
MAY BE SOLD AS-IS OR REMANUFACTURED WITH API 16A CERTIFICATION
$0.00●Draw Works:
National 55E D/D, Lebus 1-1/4” Grooving, Kelco Catheads, Overrunning Clutch, Driller’s Console, Crown-O-Matic, Back Porch w/4’Wx16’L Drop Down Compound Drive, Parmac 46SR 46” Sgl Hydro Brake, National 2-“Eng Sectional Compound, #1 Section p/b CAT D-379 Eng, HMSO, Premium Pane, Air Starter, OWI C245-125 Torque Converter, Air Clutch, Covered Master Skid, #2 Section p/b CAT D-379 Eng, with Air Starter, National C245-125 Torque Converter, Air Clutch, Covered Master Skid.
●Derrick:
Lee C. Moore 131’Hx18’6”W. 440,000# SHL Cantilever Pin-Type, Crown Block w/(5) 42” Sheaves, 54” Fastline Sheave f/1-1/4 line, Crown Safety Platform, Racking Board, Tong Counterweights, Mast Stand, Stand Pipe manifold , Sowa 350 Ton Block/Hook w/elevators.
●Substructure:
DRECO (NEW) Box on box, 22’ (H) X 28’ (W) X 55’ (L)
●Rotary Table:
SJ Petro 20 ½ x 54” w/split master bushing
●Mud Pumps:
(1) MD-9 Triplex 1000 hp, CAT D-399 power
(1) Emsco F-1000 Triplex, CAT D-398 power
●Mud System Pits:
1200 total bbl, working,
(4) 5X6 centrifugal mixing pumps, w/agitators
●Solids Control Equipment:
(2) Derrick linear shakers
Derrick 2 cone desander
Derrick 12 cone desilter
Derrick degasser
●Water Tank:
500 bbl water tank and 13,000 gal fuel tank w/3 compartment lubester
(2) 2X3 centrifugal pumps
●Generator House:
(2)275 KW, 480 volt generators, powered by Caterpillar C-3408 engines
Sullivan Palatek 30 hp screw type air compressor
●BOP Control System:
Koomey 80 (4) station closing unit
5000lb, 11½” annular and double ram
9 valve choke manifold
●Drill String:
N/A
●Misc. Equipment:
OWI 1500 pipe spinner
Pipe racks (3-6 Sets), lifting subs ect…
(2) Upper Dog Houses w/Bear Auto Driller and Martin-Decker Wt. Indicator
Parts House
$0.002015 WESTERN STAR 4900SA Service Rig
C/w Celtic pride 72 ft telescoping mast, 50,000 lb rating, 48,000 lb Celtic pride injector, rod board, 2014 Fassi Model M30A picker, 2013 Maxistad picker, Fassi Model MA30A picker, rod tongs, rod handling tools, over shots, misc. tools, tool boxes, 2015 Ford F350 4×4 c/w coil tubing welder. 5 completet reels, All certs up to date and ready to work. Complete package in excellent condition.A/C Condition: Excellent, Differential Lock, State DOT, 6×4, Turbo, Wet Kit
$0.002015 INTERNATIONAL PAYSTAR 5900 Flushby Unit. C/w 2003, Refurbished in 2015, Western Fab Ltd. flushby unit, s/n 03-09-1008, 50 Ft. Mast height, 50,000 lb. pull rating, free standing, 3×5 Gardner Denver triple pump s/n 12493, Namco drop box, 1995 Wabash 10m3 two compartment tank, re-certified in 2002, Pull master model HL-25 working winch, PL-5 catline winch, Cranesmart crown saver, weight indicator, Plumbed for BOP’s, power tongs, Fassi model M30A.13 crane, s/n 0304, working floor , fall arrester, rod handling tools, hand tools, tool boxes, hoses, fittings. All certifications are up to date.
A/C Condition: Good, Differential Lock, State DOT, 8×6, Turbo, Wet Kit, ISX-15, Diesel, 18 spd, Overdrive
Chassis
Suspension: Neway
Number of Rear Axles: Tri
Color: WHITE
Tires: FRONT 425/65R22.5 REAR 11R24.5
Wheels: All Aluminum
Front Axle Weight: 8,164.66 kg
Rear Axle Weight: 31,297.87 kgInterior
Drive Side: Left Hand Drive
A/C Condition: Good
$0.002013 FREIGHTLINER CORONADO 122 SD Flushby Unit C/w SS Rig & Equipment flushby unit, s/n 12-0105, model 54-50, 54 ft. mast, 50,000 lb pull rating, Slant compatible, Gardner Denver 3×5 triplex pump, 5,000 lb. fluid end, 2012 Innocan Inc. 8 m3 tank, one compartment, TC-406 spec, s/n 11073.1, Pullmaster model HL-25 working winch, PL-5 catline winch, Fassi model M30A.13 crane, s/n 0304-2099, rod handling tools, rod board, 9,000 ft capacity, tool boxes, hoses , no tools. PTO, Namco drop box, working floor, all certifications are up to date.
A/C Condition: Good, Differential Lock, State DOT, 8×6, Turbo, Wet Kit
Powertrain
Transmission: 18 Spd
Overdrive: Yes
Differential Lock: YesChassis
Suspension: AirLiner
Number of Rear Axles: Tri
Color: WHITE
Tires: FRONT 425/65R22.5 REAR 11R24.5
Wheels: All Aluminum
Gross Vehicle Weight: 32,341.14 kg
Front Axle Weight: 9,071.85 kg
Rear Axle Weight: 23,269.29 kg
$0.002013 FREIGHTLINER CORONADO 122 SD Flusby Unit C/w S S Rig & Equipment flushby unit, model 54-50, s/n 13-0124, 54 ft. slant compatible mast, 50,000 lb. rating, 3×5 Gardner Denver triplex pressure pump, 5000 lb fluid end, Namco drop box, pto, Innocar Inc. 8m3 , one compartment tank, TC-406 code, s/n 11161, Pullmaster HL-25 working winch, Pullmaster PL-5 catline winch, Fassi model M30A.13 crane, s/n 0304-2099, rod board capable of holding 9000 ft, , hoses, fittings, working floor, hydraulic drive load pump, all certifications up to date.
A/C Condition: Good, Differential Lock, State DOT, 8×6, Turbo, Wet Kit
Powertrain
Transmission: 18 Spd
Overdrive: Yes
Differential Lock: YesChassis
Suspension: AirLiner
Number of Rear Axles: Tri
Color: WHITE
Tires: 425/65R22.5 FRONT 11R24.5 REAR
Wheels: All Aluminum
Gross Vehicle Weight: 32,341.14 kg
Front Axle Weight: 9,071.85 kg
Rear Axle Weight: 23,269.29 kg
$0.002012 INTERNATIONAL PAYSTAR 5600 Flushby Unit c/w 1997 Online flushby unit model 50/50 s/n 97429 Refurbished and new level four inspection in June 2014 ,at that time new HL25 working winch c/w new line, Pl-5 catline winchc/w new line, new weight indicator, new crown saver, new drop box, refurbished 3×5 gardner denver triplex pump, new hoses, new hydraulic pump, all new plumbing, new roper load pump, hydraulic driven, Slant capable, working floor, load hose, tool boxes, New wabasto engine heater, 2001 Wabash 10m3 tank, 306MS crude spec, VIPK 04/14, new paint, all tools to go to work with. Full Locking diffs, power windows, power locks, full loaded truck. Currently 10,000 engine hours. Had a new 3 ton crane installed in 2014.
Engine
Horsepower: 475
Engine Manufacturer: International
Engine Type:Maxi Force
Fuel Type: Diesel
Engine Brake: NoPowertrain
Transmission: 18 Spd
Overdrive: YesChassis
Suspension:Neway
Number of Rear Axles: Tri
Color: Red
Tires: front 425/65r22.5 60% rear 11r24.5 70%
Wheels: All Aluminum
Front Axle Weight: 7,257.48 kg
Rear Axle Weight: 31,297.87 kg
$0.002005 KENWORTH T800B Flushby Unit. c/w Online flushby unit model 50-50, s/n 24641, 40 ft. mast,Salnt compatable, Pull master HL25 and PL5 winch, Gardner Denver 3×5 triplex pump, 1997Advance 10 m3 tank,c/w new PVIK 06/14 , weight indicator, hydraulic drive load pump, ROO bumper,hand tools, rod handling tools.
Engine
Engine Manufacturer: Caterpillar
Engine Type: C-13
Fuel Type: Diesel
Engine Brake: YesPowertrain
Transmission: 18 Spd
Overdrive: Yes
Ratio: 4:30Chassis
Suspension: Air Ride
Number of Rear Axles: Tandem
Color: Siver/black
Tires: front 445/65r22.5 50% rear 11r24.5 90%
Wheels: All Aluminum
Front Axle Weight: 8,164.66 kg
Rear Axle Weight: 20,865.25 kg
$0.00Flushby Unit 2005 KENWORTH T800. C/w Lash Ent. flushby unit, 47 ft mast, slant compatible, 3×5 Gardner Denver triplex pump, 5000 psi, 2005 Advance 8m3 tank, TC 406 code, Pullmaster HL-25 working winch, Pullmaster PL-5 cat line winch, Maxi lift folding crane, weight indicator, crown saver, rod handling tools, hand tools, tool boxes, hoses, fittings. All certifications are current and up to date.
A/C Condition: Good, Differential Lock, State DOT, Overhaul, Turbo, Wet Kit
Chassis
Suspension: Air Ride
Number of Rear Axles: Tri
Color: Black
Tires: 445/65r22.5 front 11r24.5 rear
Wheels: All Aluminum
Front Axle Weight: 9,071.85 kg
Rear Axle Weight: 31,297.87 kgInterior
Drive Side: Left Hand Drive
A/C Condition: Good